A Hands-On Replica Breitling Superocean Héritage II B20 42 MM Watch

Breitling and Tudor decided to combine their expertise in mechanical watch design and production before changing the model. This is not only evident in the interview with CEO Georges Kern, but also reflected in the timepiece itself. The modified Breitling caliber B01 provides the MT5813 for the Tudor chronograph, while the replica Breitling Superocean Heritage II B20 42 mm black dial watch UB2010121B1S1 now uses the internal Tudor movement MT5612.

The Breitling Superocean Héritage II replica UB2010121B1S1 is powered by the automatic B20 caliber that came from a collaboration with Tudor, it has a very balanced rate and a power reserve of 70 hours.


The Case

The Breitling Superocean Héritage II watch fake is the first watch to use the three-hand movement since 2017, and bears the name B20 in its modified version. Breitling first issued the 42- and 46- mm models in 2017, followed by the launch of a third size at Baselworld 2018 that measures 44 mm, as well as our test watch – the unusual two-tone 42-mm version in stainless steel and rose gold. Black elements on the watch, like the bezel, dial and the Aero Classics rubber strap with its Milanese-style mesh pattern, lend both presence and elegance.

The Dial

The old Breitling logo – a curvy “B” – in place of the winged letter and stylized anchor, has returned to the dial. (The earlier logo was introduced in 1979 to show equal kinship to flying and diving.) Proof of its status as an officially certified chronometer stands below the brand name.
The lower portion of the dial features the Superocean name in its characteristic font and references its water resistance and "Automatic" watch movement – which, unfortunately, cannot be seen beneath Breitling’s solid threaded caseback.



And it would be a sight to see. In contrast to the original Tudor design, the Breitling B20 fake is more finely decorated – with Geneva stripes and satin finishes, and two additional jewels. Otherwise, both versions have the same design and features. The balance wheel is stable and supported beneath a bridge, vibrating at a rate of 4 Hz with variable inertia and a silicon hairspring. Fine regulation is adjusted via screws, to a chronometer-certified level, just like the Tudor.
In actual practice, the Superocean Héritage II replica watch can do what the COSC certificate promises. It runs smoothly with a gain of about 3 seconds per day with minimal positional differences. At the end of the 70-hour power reserve, the amplitude falls to slightly below 200°, but the rate remains stable at +2 seconds.


The Bezel

The unidirectional rotating dive bezel is one of the most striking changes Breitling made to the Superocean Héritage II replica, while taking care to preserve the character of the watch that made its debut in 1957. The rotating bezel contains an ultra-hard high-tech ceramic inlay that resists both scratches and impacts. The gold rim has a finer look than that of its predecessor, though it is still easy to grasp and turn with half-minute ratchets. It seems a bit loose for use as a professional dive watch.
The bezel lacks a precise minutes track despite the one printed directly next to it on the dial. This would allow for exact setting of the dive time, to the minute. But this shouldn’t be a problem at all for fans of recreational diving, who just happen to be the main target audience of the Superocean Héritage II replica. And although the gold seconds hand cannot be seen in the dark for a function check (due to a lack of luminous material), the hour and minutes hands are both clearly visible.

A study in contrasts, rose gold and black draw our gaze, with a new ceramic inlay bezel.
A design featuring unusual shapes – a triangle on the hour hand, a diamond-shaped minutes hand, and slightly conical hour markers – relies heavily on the original Héritage from 1957. The all-important minute hand for diving extends precisely out to touch the dedicated track around the dial circumference. Unfortunately, only eight points are visible under limited lighting conditions – insufficient for professional divers, in any case. The luminous dot on the ceramic bezel stands out alongside the slightly brighter hands, but this alone cannot help determine a precise, to-the-minute calculation of dive time. In daylight conditions the combination of black, white and rose gold creates an easily legible ensemble.

The Strap

The folding clasp opens with two deployment buttons. The upper part contains a strap extension.
It’s no simple thing to fit the Aero Classic rubber strap to the wrist. It must be cut to measure and then can no longer be altered. Only the single-sided folding clasp provides an additional 9 mm of variability; a sliding element offers seven different positions for adjusting the strap length, and is simple to use. The polished clasp has two deployant buttons on the side for opening, with a winged "B" making reference to an earlier Breitling era.
Once the rubber strap has been tailor-fit, the Breitling Superocean Héritage II 42 mm watch fake sits snugly on the wrist where, despite its case thickness, it doesn’t seem overly heavy, thanks to its contrasting design features – a truly stunning piece for Breitling fans who go diving for fun.



The Details

Model: Breitling Superocean Héritage II B20 Automatic 42 replica UB2010121B1S1
Functions: Hours, minutes, central sweep seconds, date, unidirectional rotating dive bezel with ratchet feature, screw-down crown
Movement: Breitling B20, automatic, 28,800 vph, 28 jewels, balance ring with variable inertia, silicon hairspring, screw-type fine adjustment, Incabloc shock absorption, 70-hour power reserve, diameter = 30.8 mm, height = 6.50 mm
Case: Stainless steel and 18k rose gold, domed sapphire crystal with anti-reflective treatment on both sides, water resistant to 200 m
Strap and clasp: Black rubber Aero Classic with single-sided folding clasp
Dimensions: Diameter = 42.06 mm, height = 14.31 mm, weight = 144 g
Variations:
With mesh strap: ($6,040)
Stainless steel with rubber strap: ($4,560)
Stainless steel with mesh strap: ($4,885)
Price: $5,715

Conclusion

I am happy to say that Breitling Superocean Heritage II replica watch is one of the few watches that I have found to work well with bracelets. As a daily dress for a variety of people and lifestyles, Breitling Superocean Heritage II B20 replica (black or other colors) is an excellent choice. Not only this, but it is difficult to find a watch like this with sports or advanced equipment. More information, please visit our latest replica Breitling watches listing, we are selling almost all model AAA grade 1 :1 cloned Breitling watches.
Read more from https://cosywatch.blogspot.com/2020/05/a-hands-on-replica-breitling-superocean.html.

Comments

Popular posts from this blog

Review The New Breitling Chronomat B01 42 "Frecce Tricolori" watch replica

Has the price of the Patek Philippe Nautilus 5711 / 1A-010 watch replica shot up by 50%?

Introducing the Rolex GMT-Master II 40 MM Watch Replica in Oystersteel